The new models have retained the operating features of its popular predecessors, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The units offer three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, and front panel frequency selector lockout.In addition, the Series offers an impressive array of design and performance improvements:
— An improved receiver: designed for increased sensitivity and image rejections.
— A double FET balanced mixer: for improved receiver intermodulation rejection.
— New power supply protection: and temperature compensation for improved stability and reliability over wide temperature ranges.
— Surface mount components: for increased resistance to shock and vibration.
— Improved display lighting: for easy reading in a wide range of light conditions.
— Variable Power Output from 2 watts to 25 watts (RCI-2950DX)
|General||RCI-2950DX & 2970N2|
|Frequency Range||10 Mtr: 28.000 – 29.6999 MHz
12 Mtr: 24.8900 – 24.9900 MHz
|Tuning Steps||1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz|
|Emission||USB, LSB, CW, AM, FM|
|Frequency Control||Microprocessor / Phase-Locked-Loop Synthesizer|
|Operating Temperature Range||-10 ºC to + 50 ºC|
|Meter Function|| RF Output, RX Signal Strength, Modulation, SWR
(LCD Display Indicates Relative Values)
|Antenna Impedance||50 W|
|Input Voltage||13.8 Vdc|
|Microphone||400 W Dynamic PTT – 6 Pin|
|Size (W x D x H)||2950DX – 7 3/4 ” x 10 3/4 ” x 2-3/8″
2970N2 – 7 7/8″ x 11 1/8″ x 3 1/4″
|Weight||2950DX – 4 lb 3 oz
2970N2 – 8 lb 3 oz
|Shipping Weight||2950DX – 7 lb.
2970N2 – 11 lb
|RF Power Output||RCI-2950DX – 10 Watts RMS: CW / AM / FM
25 Watts: SSB (PEP)
RCI-2970N2 – 100 Watts RMS: CW / AM / FM
200 Watts: SSB (PEP)
|Current Draw @ Full Power (PEP)||RCI-2950DX – 8 Amps
RCI-2970N2 – 32 Amps
|Modes||USB, LSB, CW, AM, FM, PA|
|CW Keying||Semi break-in|
|Carrier Suppression||– 50 dB|
|Spurious Emission||– 50 dB|
|Antenna Connector||UHF Type, 50 W|
|Sensitivity||AM / CW: 0.5 µV for 10 db SINAD
FM: 0.25 µV for 12 db SINAD
SSB: 0.15 µV for 10 db SINAD
|Image Rejection Ratio||– 65 db|
|Audio Output Power||2.5 Watts @ 10% THD into 8 W|
• 10 Meter Radios are intended for use by amateur radio operators only. A license from the FCC is required.
• 10 Meter Radios come with a warranty from their respective manufacturer. Returns are not accepted at Radio Dr.
152total visits,1visits today